What "300 DPI" means for a picture, and how to set it
A form, a journal or a print shop asks for your picture "at 300 DPI", and your file says 72 or 96. That sounds like your picture is not good enough. Usually it is fine, and only a number needs to change. Sometimes it really is too small. Here is how to tell which.
Pixels are the picture; DPI is a note
A digital picture is a grid of pixels, for example 1200 across and 1800 down. That is all the detail it has. DPI, dots per inch, is a note in the file that says how many of those pixels should be put on each inch of paper when it is printed.
The same 1200 × 1800 picture is 4 × 6 inches at 300 DPI and about 16.7 × 25 inches at 72 DPI. Nothing in the picture differs between the two: only the size on paper, and so how fine the dots look.
How many pixels a print needs
Multiply the size on paper in inches by the DPI (one inch is 2.54 cm). At 300 DPI:
- A 3.5 × 4.5 cm passport photo needs about 413 × 531 pixels.
- A 2 × 2 inch photo needs 600 × 600 pixels.
- A 4 × 6 inch print needs 1200 × 1800 pixels.
- An A4 page needs 2480 × 3508 pixels.
Case 1: enough pixels, wrong number
If your picture has the pixels the print needs but the file says 72 or 96, or says nothing, only the note is wrong. Change image DPI rewrites that note in a JPG or PNG and leaves the picture data untouched, so there is no loss of any kind. Add the picture and it shows the size it will print at the resolution you choose.
Case 2: not enough pixels
If the picture is 400 pixels wide and it has to print 10 cm wide at 300 DPI, it needs about 1181 pixels and does not have them. Writing "300" in the file then only makes it print 3.4 cm wide. Enlarging it with Resize Image fills the size but cannot add detail, so the print looks soft. The real fix is a larger original: the photo from the camera rather than the copy from a chat app.
Photos for forms
A request such as "3.5 × 4.5 cm, 300 DPI" is a request for 413 × 531 pixels. Passport photo maker takes the size in millimetres and the DPI and cuts your photo to exactly that. On screens and in upload forms that state pixels, the DPI number is ignored: there, only the pixels and the file size count.